HONSEL工作机会

我们一直在为我们强大的团队寻找有能力、有进取心的人员。

 

1、职位名称:嵌入式软硬件及APP开发高级工程师

   Position: Embedded software and hardware and APP development senior engineer

   工作地点:洪塞尔紧固件(无锡)有限公司

   Workplace: Honsel Fastener Wuxi Co., Ltd.

   招聘数量:1人

   Recruiting No.: 1 person

   职位描述:

   Job Description:

   1、无刷电机设计和新产品设计研发;

   Brushless motor and new product research and development

   2、负责对接客户提出的各项技术要求;

   Responsible for meeting the technical requirements of customers

   3、电子电路的设计与开发,包括完成原理图、PCB的设计、器件选型及功能实现;

   Design and development of electronic circuits, includes schematic diagram, PCB design, device selection and function realization

   4、嵌入式底层驱动和通讯等外设驱动开发;

   Embedded low-level drive and communication and other peripherals drive development

   5、基于嵌入式特性,对控制软件算法进行优化;

   Based on the embedded characteristic, optimized the control software algorithm

   6、编制新产品开发说明书及相关文件,包括但不仅限于:技术图纸、配线图、BOM表和控制图等;            Prepare new product development instructions and related documents, including but not limited to: technical drawings, wiring diagrams, BOM tables and control charts, etc.

   7、解决产品量产中的问题,如故障分析、设计改进等;

   Solve problems in product production, such as failure analysis, design improvement, etc.

   8、负责无刷电机产品的测试方案和性能评估;

   Responsible for testing and performance evaluation of brushless motor products

   9、熟练运用PROTEL、AutoCAD、Pro/E等绘图软件及相关设计分析软件;

   Skilled in using PROTEL, AutoCAD, Pro/E and other drawing software and related design analysis software

   10、负责公司 APP产品iOS/Android客户端的开发工作,进行客户端应用的技术设计

   Responsible for the development of iOS/Android client-side of the company's APP products, and carry out the technical design of client-side application

   11、服务器的架设,数据库的设计与开发,客户端与后台服务器的接口设计,日常运维工作。

    Server setup, database design and development, interface design of client-side and back-end server, daily operation and maintenance work

 

职位要求:

Requirements:

   1、理工科背景,机械、计算机、软件工程、多媒体、电子工程、通信等相关专业,本科及以上学历;           Engineering background, major in mechanical, computer, software engineering, multimedia, electronic engineering, communication, etc.. Bachelor degree or above

   2、五年以上的电子产品软、硬件开发经验,三年以上无刷电机项目相关开发经验,有电动工具无刷电机设计及线路板设计和软件设计工作经验者优先;

   Five years experience in electronic product hardware and software development, 3 years experience in brushless motor project related development. Electric tools brushless motor design and PCB design and software design work experience is preferred

   3、熟悉单片机产品开发、数字电路、模拟电路原理,精通控制系统和程序的编写及方案制定;

   Familiar with SCM product development, digital circuit, analog circuit principle, master control system and program preparation and programming

   4、精通C语言/C++ /Java等编程语言;精通Linux平台或其他嵌入式OS平台的软件开发,有SQL/Shell/PHP/Perl/Python等使用经验者优先;

   Proficient in C language /C++ /Java programming language; Proficient in Linux platform or other embedded OS platform software development, SQL/Shell/PHP/Perl/Python using experience is preferred

   5、熟悉嵌入式系统及扩展功能模块和底层驱动的设计与编程; Familiar with embedded system and extended function module and low-level driver design and programming

   6、熟悉嵌入式软件优化技巧;

   Familiar with embedded software optimization techniques

   7、熟悉ST ARM开发及TI DSP开发经验者优先;

   Familiar with ST ARM development and TI DSP development experience is preferred.

   8、熟悉移动APP软件开发和测试流程;精通IOS或Android系统;

   Familiar with mobile APP development and testing process; Proficient in IOS or Android

   9、工作认真负责,有良好的团队合作精神,良好书面和口头表达能力;

   Responsible and responsible, good team work spirit, good written and oral presentation skills.

   10、英语六级以上; 具有非常强的英文文献阅读能力和专研精神。

   Cet-6 or above; Have very strong English literature reading ability and specialized research spirit.

 

2、职位名称:自动化开发高级工程师

Position:

工作地点:洪塞尔紧固件(无锡)有限公司

Workplace: Honsel Fastener Wuxi Co., Ltd.

招聘数量:1人

Recruiting No.: 1 person

职位描述:

Job Description:

   1、根据客户需求,负责对接客户提出的各项技术要求,并参与机械结构设计;

   Responsible for meeting the technical requirements of customers, and participate in mechanical structure design.

   2、针对具体控制对象,进行控制算法设计与实现,并进行开发和验证;

   Design, implement, develop and verify the control algorithm based on specific object.

   3、PLC程序、人机界面程序、以及数据库等相关程序的设计和编写;

   Design and preparation of PLC program, man-machine interface program, and database and other related program

   4、负责电气设备平台化建设;

   Responsible for the construction of electrical equipment platform

   5、编制新产品开发说明书及相关文件,包括但不仅限于:技术图纸、设备电气原理图、配线图、BOM表和控制图等;

   Prepare new product development instructions and related documents, including but not limited to: technical drawings, electrical schematic diagram of equipment, wiring diagram, BOM and control charts, etc.

   6、客户现场设备的调试及维护。

   Equipment commissioning and maintenance on site

   7、在产品开发项目中,负责设备电气元件选型,调试和测试并使该项目得以完善;

   8、产品项目的所有相关的开发规范,说明书,原理图等文档的编写工作;

职位要求:

Requirements:

   1、本科以上学历优先;

   Bachelor degree or above is preferred.

   2、5年以上非标自动化设备电控开发经验(能力突出者可以适当放宽);

   More than 5 years experience in electronic control of non-standard automation equipment  

   3、精通三菱,西门子等PLC编程;

   Proficient in PLC programming such as mitsubishi and Siemens

   4、应用西门子PLC主导过复杂设备的开发,并且有现场调试设备经验 ;

   Skilled in development of complex equipment through Simens PLC, and experienced in on site service

   5、精通现场总线伺服的应用(如Ethercat, Profinet等),精通运动控制;

   Proficient in field bus servo application (such as Ethercat, Profinet, etc.), proficient in motion control

   6、有机械设备类产品开发经验 ;

   Experience in product development of mechanical equipment

   7、熟悉电气布局,电气部件选型等;

   Familiar with electrical layout, electrical component selection, etc

   8、熟练运用AutoCAD、solidworks等绘图软件及相关设计分析软件;

   Skilled in AutoCAD, solidworks and other drawing software and related design analysis software      9、能适应出差调试工作;

   Adapt to business trip

   10、有较强的责任心,善于总结分享;

   Have a strong sense of responsibility, good at summarizing and sharing

   11、熟悉运动控制原理及实现方法,掌握运动控制算法及运动规划算法工作经验者优先;

   Familiar with motion control principle and implement method, experienced in motion control algorithm and motion planning algorithm is preferred

   12、有工业控制、机器人行业,紧固行业经验者优先;

   Experience in industrial control, robot industry, fastener industry is preferred

   13、英语四级以上、有非常强的英文文献阅读能力和专研精神;

   Cet-4 or above; Have very strong English literature reading ability and specialized research spirit.  

 

3、职位名称:质量工程师

工作资格:

Qualification for work:

   1、全日制专科以上学历,机械专业优先

   Full-time specialist degree or above, mechanical major preferred

   2、能熟练运用质量分析工具

   Proficiency in the use of quality analysis tools

   3、生产型企业工作2年以上质量管理经验

   At least 2 years of quality management experience in production enterprises

   4、熟悉TS16949的五大手册并能运用QC七大手法、PDCA、8D等工具

   Familiar with TS16949's five manuals and can use QC seven techniques, PDCA, 8D and other tools

   5、工作认真负责,严谨细致,有较强的分析解决问题的能力

   Carefully responsible, rigorous and meticulous, with strong analytical and problem-solving skills      6、有良好的团队合作精神,良好的内外部沟通能力,良好的客户服务意识

   Good team spirit, good internal and external communication skills, good customer service awareness

   7、熟悉电脑操作,能熟练使用常用办公软件

   Familiar with computer operation and good use of common office software

   8、有一定的英语听说读写能力

   Ability to read, write and speak English

   9、紧固件企业工作经验者优先考虑

   Working experience in fastener enterprise is preferred

工作内容:

Work content:

   1、服从部门的工作安排工作及协调

   Obey departmental organization of work and coordination

   2、负责过程检验指导书的编制、更新、维护以及使用人员的培训事宜;

   Responsible for the preparation, updating, maintenance and training of users of the process inspection guidelines

   3、组织制程品质数据分析,进行客户质量抱怨追踪、处理、8D报告的书写及跟踪验证;

   Organize process quality data analysis, conduct customer quality complaint tracking, processing, writing and tracking verification of 8D reports

   4、组织协调产品的过程检验,落实各工序首检、巡检、末检以及SPC的运行,及时掌握生产现场质量动态,

   Organize and coordinate the process inspection of the products, implement the first inspection, inspection, final inspection and SPC operation of the various processes, and keep abreast of the development of the quality of the production site in a timely manner

   5、负责制程品质异常的处理,提出处理意见,会同相关人员分析处理生产现场的异常质量情况,验证有关纠正预防措施的落实;

   Responsible for processing abnormal process quality, put forward suggestions, analyze and handle abnormal quality situation on production site in conjunction with relevant personnel, verify the implementation of corrective and preventive measures

   6、汇总和编制 过程质量报告以及协助年度内审事宜

   Summary and preparation of process quality reports and assistance with annual internal review matters

   7、协助相关部门解决质量问题和优化工艺等

   Assist related departments to solve quality problems and optimize process, etc..

 

 

4、职位名称:质量部检验员

招聘人数:1人

工作内容:

   1、服从上级安排的其他工作

   2、负责首件检验、过程检验或最终检验;

   3、汇总、归档 各类质量报表,如 生产过程记录、流程卡、检验和试验记录等相关记录;

   4、落实各工序首检、巡检、末检以及SPC的执行,及时掌握生产现场质量动态,

   5、配合质量工程师各类质量问题的分析和整改;

   6、协助相关部门解决质量问题和优化工艺等

工作资格:

   1、有相关工作经验,机械专业优先

   2、能熟练相关检测仪器及设备,如 千分尺 游标卡尺 硬度计 轮廓仪、投影仪等

   3、了解TS16949 质量体系

   4、工作认真负责,严谨细致,有较强的分析解决问题的能力

   5、有良好的团队合作精神,良好的内外部沟通能力,良好的客户服务意识;

   6、熟悉电脑操作,能熟练使用常用办公软件。

 

 

 

联系方式:una.qian@honsel.cn